China Serving Bowl - 29.3x8.6cm - Base: 8cm - Moule pour Fusing
958.375
10163
68,27 €
Creative Ceramics Moules pour Fusing, Thermoformage & Casting
This is a very special mould to make a medium size but fairly deep bowl. The result can be a simple piece or artwork as well as a utilitarian object in the dining area. Combine with 958.343 Small China Soup Bowl & 958.347 Breakfast Tray.
Instead of cutting the glass round try a square piece instead. Fuse identical pieces from two contrasting colours. The steep angle of this mould will reveal the bottom colour around the edges.
Recommended Firing Chart
Please Read: The steep angle of the mould may result in an uneven slumping. Reposition the slumped piece and fire a second time. Use a very low slumping temperature with a long soak.This firing recommendation has been calculated for use with Bullseye glass. Whereas the most typical casting glasses are frit and billets, you can have great results using sheet glass, stringers, rods as well as prefabricated components.The chart shown below is also based on the assumption that you are using a top fired kiln, e.g. Paragon GL22, GL24, BVD Flat bed kilns etc. Following this recommended firing chart will lead to a smooth piece of glass with a glossy surface. The finished piece will shrink somewhat, depending on the amount of glass used. Some coldworking on the edges with a diamond pad may be necessary. By lowering the temperature to a sinter firing (approx. 720°C) the piece will shrink less and have a 'sugary' look similar to pâte-de-verre.
Références spécifiques
10163 2.400000